Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Wolf Tooth Components

Spoke Life Cycles is proud to carry Wolf Tooth components! Call us or Stop by to see our full selection.

Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Wolf Tooth Components 25mm B-Screw
$1.00
When using the GC 42 or GC 40 with a Shimano rear derailleur, a longer B-screw may be needed. This is a high quality 18-8 stainless steel M4 x 25 mm screw.
Wolf Tooth Components Tanpan Ferrule
$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline
Wolf Tooth Components Remote Pivot Axle
$4.95
Wolf Tooth Remote Pivot Axle
Wolf Tooth Components CAMO Chainring Bolt Kit
$5.00
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
Wolf Tooth Components B-RAD Dogbone Base
$9.95
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
Wolf Tooth Components Ultralight Stem Cap With Integrated Spacer
$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
Wolf Tooth Components Crown Race
$10.95
Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets
Wolf Tooth Components Compression Plug
$14.95
Compression plug for Wolf Tooth headsets. - Compression plug works with steerer tube inner diameters ranging from 23.2mm to 24.2mm
Wolf Tooth Components Crown Race Installation Adaptor
$14.95
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
Wolf Tooth Components set of 4 chainring bolts for 104 x 30t (10 mm long)
$14.95
We think these bolts the best on the market. They have a 5 mm hex socket and are 10 mm long so you can use a bash ring with your 30T x 104 chainring. The bolt length is laser engraved on the head to avoid confusion with shorter bolts. Simply better. No nuts are included with these bolts because the 30t x 104 chainring has threaded standoffs. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m MAX with light grease on the threads only. Product weight - 4 bolts = 4g
Wolf Tooth Components Precision Spacer Kit
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in the Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum
Wolf Tooth Components B-RAD 2-Base Mount
$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
Wolf Tooth Components EnCase System Bits
$19.95
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
Wolf Tooth Components Pack Wrench Inserts
$19.95 - $29.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
Wolf Tooth Components Set of 4 Chainring Bolts for M8 Threaded Chainrings (10mm Long)
$19.95
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
Wolf Tooth Components set of 4 chainring bolts+nuts for 1x
$19.95
We think these bolts and nuts are the best on the market. Other short bolts/nuts designed for single rings use a slotted nut that is likely to strip-out the first time you use it. Ours use a large hex socket on both the bolt (5 mm) and the nut (6 mm). Bolts are 6 mm long and have the length laser engraved on the head. Simply better. These work great with Wolf Tooth or any other brand single chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m with light grease on the threads only. Product weight: 4 bolts = 7g
Wolf Tooth Components Roadlink
$21.95
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components B-RAD 3-Base Mount
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
Wolf Tooth Components Precision Spacer 5 Pack
$24.75
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum
Wolf Tooth Components B-RAD 4-Base Mount
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
Wolf Tooth Components B-RAD Accessory Strap Mounts
$24.95 - $34.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
Wolf Tooth Components B-RAD Double Bottle Adapter
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
Wolf Tooth Components Front Boostinator
$24.95
Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.
Wolf Tooth Components GoatLink
$24.95 - $29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported
Wolf Tooth Components Seatpost Clamp
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$24.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wolf Tooth Components Valais Dropper Post Seat Bag Adaptor
$24.95
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
Wolf Tooth Components set of 5 chainring bolts+nuts for 1x
$24.95
We think these bolts and nuts are the best on the market. Other short bolts/nuts designed for single rings use a slotted nut that is likely to strip-out the first time you use it. Ours use a large hex socket on both the bolt (5 mm) and the nut (6 mm). Bolts are 6 mm long and have the length laser engraved on the head. Simply better. These work great with Wolf Tooth 5 bolt rings or any other brand 5 bolt single chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m with light grease on the threads only. Product weight: 5 bolts = 9g
Wolf Tooth Components Remote Clamp, for Magura Brakes
$25.95
Wolf Tooth ReMote Clamp for Magura Brakes
Page 1 of 4 Next page