Wolf Tooth Components
- WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling specific applications - Reduces friction on moving components while protecting them from contaminants, water, and corrosion - Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC) in all conditions - Creates smooth, easy component movement for low energy loss - Long-lasting lubrication for extended bearing and component life - High resistance to oxidation and corrosion - Can be used on steel, alloy, Carbon, and titanium
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
When using the GC 42 or GC 40 with a Shimano rear derailleur, a longer B-screw may be needed. This is a high quality 18-8 stainless steel M4 x 25 mm screw.
The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline
Wolf Tooth Remote Pivot Axle
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
CAMO Chainring Bolt Kit - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
$6.95 - $209.95
Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft grade aluminum. - Compatible with Trek Knock Block system - These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager) - 1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets
Headset bearings for Wolf Tooth headsets. - Replacement bearings
We think these bolts the best on the market. They have a 5 mm hex socket and are 10 mm long so you can use a bash ring with your 30T x 104 chainring. The bolt length is laser engraved on the head to avoid confusion with shorter bolts. Simply better. No nuts are included with these bolts because the 30t x 104 chainring has threaded standoffs. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m MAX with light grease on the threads only. Product weight - 4 bolts = 4g
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in the Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
Headset bearings for Wolf Tooth headsets. - Replacement bearings
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
$19.95 - $29.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. - 100% Silicone weather resistant material - Plastic bar end plugs - 5mm thick
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
Trainer Caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Cold weather and short days are never far from a Minnesotan's mind so Wolf Tooth engineers created Trainer Caps to reduce barriers to winter workouts. Non-drive side axle caps are joined by drive-side plugs that can be installed or removed without tools to make the prospect of hopping on the trainer a little more bearable. - Compatibility: Wolf Tooth Rear Axles (not compatible with rear axles from other manufacturers) - Plug has O-ring retention – no tool required
We think these bolts and nuts are the best on the market. Other short bolts/nuts designed for single rings use a slotted nut that is likely to strip-out the first time you use it. Ours use a large hex socket on both the bolt (5 mm) and the nut (6 mm). Bolts are 6 mm long and have the length laser engraved on the head. Simply better. These work great with Wolf Tooth or any other brand single chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m with light grease on the threads only. Product weight: 4 bolts = 7g
Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - 6.5mm thick
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Page 1 of 8 Next page