Shimano

Stiff, dependable and hungry for singletrack, Shimano's Trail wheels are disc-brake specific and come with true UST-compatibility in a 21-millimeter-wide, dent-resistant Scandium hoop. At just 400 grams per rim, accelerating out of corners comes naturally. And for as light as these wheels feel on the ups, thanks to a straight-pull lacing design that uses 24 butted spokes per wheel, you can open it up on the downhills and charge hard into aggressive corners. The 15mm through-axle up front helps keep your front end in line, too.

The 29-inch XTR Race wheels offer new UST tubeless, carbon laminated aluminum rims with 20mm internal widths for the lightweight wheelset you need to power both up and down the mountain. • Carbon laminated aluminum tubeless • Super lightweight rim, with same durability as aluminum • 24C rim width • Front 28, Rear 28 butted spokes • New lightweight bearing and axle system • 33g lighter aluminum rear 12mm axle (vs. M988) • Front axle: 15x100mm thru-axle • Rear axle: 142x12mm thru-axle

The 27.5-inch XTR Trail wheels offer new UST tubeless, carbon laminated aluminum rims with 24mm internal widths for the durable yet light wheelset you need for your all mountain ride. • Carbon laminated aluminum tubeless • Super lightweight rim, with same durability as aluminum • Front 28, rear 28 butted spokes • New lightweight bearing and axle system • 33g lighter aluminum rear 12mm axle (vs. M988)

The 29-inch XTR Trail wheels offer new UST tubeless, carbon laminated aluminum rims with 24mm internal widths for the durable yet light wheelset you need for your all mountain ride. • Carbon laminated aluminum tubeless • Super lightweight rim, with same durability as aluminum • Front 28, rear 28 butted spokes • New lightweight bearing and axle system • 33g lighter aluminum rear 12mm axle (vs. M988)

• Model Number : WH-M8000 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : QR • Over Locknut : 100mm • Axle Length : 108mm • QR Skewer Length : QR skewer length: 133mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 23.9mm • Recommended Tire : 27.5x1.90-2.25 • Faster acceleration and smoother rotation. • High rigidity and durability. • 28pc butted spokes (F&R). • Offset rim design with better spoke tension balance for durable wheel construction.

• Model Number : WH-M8000 • Series : DEORE XT • Brake Type : Disc Brake • Axle Type : QR • Over Locknut : 100mm • Axle Length : 108mm • QR Skewer Length : QR skewer lenght: 133mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 23.9mm • Recommended Tire : 29x1.90-2.25 • Faster acceleration and smoother rotation • High rigidity and durability. • 28pc butted spokes (F&R). • Offset rim design with better spoke tension balance for durable wheel construction.

• Model Number : WH-M8020 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : 15mm E-Thru • Over Locknut : 100mm • Axle Length : 100mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 27.9mm • Recommended Tire : 27.5x2.00-2.40 • Increased tire rigidity for improved traction. • 24C wide-profile offset rim. • Front/ Rear: E-thru. • 28pc butted spokes (F&R). • Offset rim design for durable wheel construction.

• Model Number : WH-M8020 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : 15mm E-Thru • Over Locknut : 100mm • Axle Length : 100mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 27.9mm • Recommended Tire : 29x2.00-2.35 • Increased tire rigidity for improved traction. • 24C wide-profile offset rim. • Front/ Rear: E-thru. • 28pc butted spokes (F&R). • Offset rim design for durable wheel construction.

Enduro racing demands unique equipment, and Shimano's Deore XT Enduro Wheels fill the niche with low weight for efficient climbing and DH-style toughness for technical downhill sections. The wheels sports stiff, 25mm-wide, tubeless-ready rims and fully rebuildable angular-contact bearing hubs. A stout 15mm front through axle stiffens up your front end for precise tracking and cornering, and Shimano's Deore XT freehub sports quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. Center-lock rotor mounts make brake rotor installation quick and easy.

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub. - 187mm axle width

Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend

For optimum wheel strength and reliability, Shimano's Dura-Ace Front Hub is made of cold-forged aluminum with an oversize shell, sturdy flanges and a 15mm internal axle. Inside, diamond-polished bearing races and stainless-steel ball bearings minimize rolling resistance, while high-tech seals keep out water and dirt for maximum durability. This hub also features tool-free bearing adjustment for easy maintenance plus a light and sturdy aluminum/steel quick-release skewer.

The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Proper positioning with 12mm E-THRU - Angular contact bearings - Compact & lightweight - Low rotational resistance - Effortless setting of disc rotor - Durable sealing performance

Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.

The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance

•  Cone and ball bearings with races ground by a Cubic Boron Nitride tool for smooth rolling durability • 15x100mm E-thru Axle system designed to be durable enough for all-mountain riding while remaining light enough for XC racing • Center Lock disc brakes provide reliable braking power • Center to Flange: 34 R , 23 L • Color: Gray • Flange Diameter: 44 R , 44 L • Hub Center to Flange (mm): 34 mm , 32 mm • Hub Drilling: 32 • Hub/Brake Compatibility: Center-Lock Disc • Spoke Interface: J-Bend

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

Smooth-rolling performance and 11-speed compatibility define Shimano's 105 rear hub. Shimano's trademark angular contact bearings ensure that your wheels roll as smooth as silk. This hub includes a Shimano quick-release.

Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

Shimano, FH-M828/788/678/648, Freehub body, Y3TH98050

Shimano Dura-Ace 9000 Hub Quick Release Skewer. - Axle Type: Standard QR

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

The stout design of Shimano's Deore XT front hub minimizes fork flex and builds into a super-reliable wheel. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent Center Lock disc mount, which makes rotor installation a breeze. A quick-release skewer makes wheel installation and removal a breeze.

Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smooth and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.