Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Apparel

BUY IN STORE OR ONLINE

$549.99
A brand-new shoe in the Sidi lineup, the Tiger 2 is light, aerodynamic, breathable, and well-performing. The upper is Microfiber TechPro and Mesh. The Microfiber TechPro is eco-friendly with antibacterial and hydro treatment. Hydro treatment reduces water absorption, while the mesh provides great breathability and creates the ideal microclimate inside the shoe. A Comfort Fit Insole is provided for lightweight support. The Carbon Sole is handmade exclusively with carbon fiber in a weave pattern oriented at opposing angles. It features fully replaceable tread blocks in the toe and heel area along with the replaceable cleat plate. The new "Double Tecno-3 Push Flex" rotor, entirely made by Sidi's R&D department (research and development center) together with the precious collaboration with sponsored athletes, completely eliminates the pressure zone on the instep and significantly improves the closure feeling. This system requires a smaller support surface on the tongue of the shoe and is equipped with a central flexing system capable of adapting to the different needs and conformations of the cyclist's feet, without creating areas of over pressure. Like its predecessors, it guarantees micrometric regulation, closing speed/tension release, and is replaceable. The all-new integrated heel is light and reinforced to avoid deformation after prolonged efforts and pressure. Thanks to its anatomically shaped structure, it stabilizes and supports the foot while pedaling, while the Reflex inserts offer greater safety on the road, with poor visibility conditions. As in the previous model, the Adjustable Heel Retention Device reinforces the spoiler, significantly improving the fit. - Great traditional Sidi quality and construction.
$549.00
The Bluegrass Legit Carbon Helmet is a premium race-day full-face helmet. Developed for competitions, it exceeds all of the certifications for racing downhill and enduro. - The Legit Carbon features a flexible safety-release visor to avoid twisting of the neck in impacts from any angle. - Designed with hearing vents to help riders maintain balance and hit their optimum performance levels - The Legit Carbon uses a carbon fiber outer shell paired with a multi-impact EPS liner to achieve the finest blend of high-impact performance and low-weight - Vents and air channeling are optimized for all-day park sessions, with two large exhausts working in synergy with the EPS channels, to keep you cool at both high and low speeds - Featuring the MIPS E5-4® brain protection system, the BLUEGRASS Legit Carbon is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion - The Legit Carbon is suitable for all head shapes and sizes, thanks to its meticulously refined internal shaping - The comfort is boosted even more by the snap-in soft padding - Durability and quality are enhanced by an injected PU foam paired with the chin guard and three polycarbonate shells strategically molded on the EPS liner
$524.99
Designed for our professional athletes, the Sidi Tiger 2S efficiently transfers all the power you can unleash while maintaining a high level of comfort, allowing you to focus entirely on the course. The Tecno 3 closure is strategically placed to prevent contact with other riders in crowded situations. The upper is made of Bioveg material derived from recycled microfibers with a plant based external finish. The MTB SRS Carbon sole harnesses the strength of interwoven carbon fibers for efficient energy transfer and its SRS technology allows riders to maintain maximum grip level at all times. -The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and significantly improves the comfort of the closure -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The adjustable heel retention device reinforces the top of the heel cup, closing the back of the shoe securely so the heel doesn't slide out during steep climbs or sprints -The all new Sidi Integrated Heel Cup is light, comfortable and reinforced to avoid deformation -Each side of the heel can be adjusted independently for a perfect fit -The upper part of the toe section is protected with anti-slip rubber to resist and deflect impacts from stones or debris when cycling -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping around 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole -The Ground SRS treads and MTB Plate are easily removable and replaceable and the sole is toe-spike compatible -To improve walkability, Sidi cycling shoes include a replaceable polyurethane heel pad
$524.99
Designed for our professional athletes, the Sidi Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it conforms to any riders' heel shape. - The Tecno-3 Push Flex closure reduces the pressure zone on the instep and significantly improves the comfort of the closure  - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints. Each side of the heel can be adjusted independently for a perfect fit - The all new Sidi integrated heel cup is reinforced to avoid deformation after prolonged efforts and extreme pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling - The C-BOOST SRS Sole is made of the latest generation carbon, designed to conform to the metatarsal area, increasing the transmission of power directly to the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determining the riders personal cleat position - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated with ventilation holes that promote the circulation of air inside the sole with each pedal stroke
$499.99 - $500.00
Upper: - Microfiber techpro matt Sole: - MTB SRS carbon-ground sole Technology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Rubber toe
$500.00
For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.
$499.99
Drako 2S SRS is designed for athletes looking for maximum foot stability to unleash all their power. The ventilated carbon sole, with the innovative Firmor Lateral Support System, combines efficient power transfer with superb lateral stabilization of the foot. The dual rotor closure allows for a perfect individual fit, with added protection from mud and debris -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The central mounted Single Techno-3 Push mechanism guarantees balanced fit for every type of instep -Techno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel doesn't slide out during steep climbs or sprints -Each side of the heel can be adjusted independently, for a perfect fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB plate are easily removable and replaceable
$499.99
The Sidi Wire 2S Road Shoes are engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort
$499.99
Engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup
$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$425.00
When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)
$425.00
Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)
$424.99
The iconic design that gave birth to our first cycling shoes over 60 years ago meets modern materials to create our lightest racing shoes. Designed to retain all support and strength, the Sidi Sixty offers the ultimate fit in a pair of racing shoes for cycling. -The Sidi Tecno-4 Push System has a single rotor to reduce the shoe's weight and guarantees the precision of a micro-metric closure -The Adjustable Heel Retention device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The Vent Carbon Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area -The Vent Carbon Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale for easy cleat alignment and replacement -The key benefits of the Vent Carbon Sole are not only superior power transfer because of its light weight and stiffness, but also warm weather comfort -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad
$419.99
- Engineered collarbone cut-out to keep your helmet rim away from your most fragile bones - Composite matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable, Four-angle Thoracic strut engineered to break away before applying excessive pressure to the back - Sliding front and rear SureFit adjusters offer Three-way adjustability for that perfect fit - Sculptured, split front for improved comfort and fit - Low profile push-button open/closure system - Easy-to-use emergency release mechanism - Injected, durable and easy-to-clean foam padding - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: from 790g (1.74lbs)
$400.00
Making a jacket that does one thing well is pretty easy. Making a jacket that does one thing perfectly is pretty hard. And making a jacket does everything exceptionally is next to impossible. Well, you could say that they specialize in the impossible, because the new Deflect Reflect Hybrid Jacket flawlessly performs a bevy of duties, from protection to visibility. Starting with protection, it's made from Specialized's wind- and water-resistant Deflect material. This fabric is extremely lightweight and breathable, so you won't ever experience that rainforest feeling in high humidity conditions. But if things do start to heat up while you're throwing down the watts, they've included two front vents, a large back vent, and laser perforated exhaust points throughout the jacket. To keep water out, the jacket also features adjustable wrist seals, a zipper garage at the collar, a drop tail to deflect road-spray, and an adjustable drawcord hem. Specialized also designed this jacket to be extremely versatile, and to complement this, the sleeves are made to be completely removable. This way, you're able to wear it as a jacket when it's pouring, and then zip off the sleeves and stow them away after you catch a break in the weather. Now, to tackle the "reflect" portion of the title, this jacket features a Schoeller fabric with 3M reflective technology that takes millions of microscopic glass beads and permanently seals them to the fabric structure. As you can imagine, this feature will increase your visibility to others on the road when it encounters light. And better yet, this benefit will not wash out over time.
$400.00
Specialized sums up their S-Works 6 road shoes in two simple phrases: explosive speed and superior comfort. The S-Works 6 is Specialized's stiffest and most efficient shoe ever. Combine that with a Body Geometry sole and footbed that optimizes hip, knee, and foot alignment, the Padlock heel system that locks your feet into the shoes, and independent Boa closures for a custom, on-the-fly fit, and you have one incredibly comfortable, efficient pair of shoes. Asymmetrical titanium cleat bolts rotate to allow for even more flexibility and range for cleat positioning, while replaceable heel treads increase shoe longevity. Plus, strategically placed no-stretch fabric improves your efficiency and connection to the bike.
$399.99
Upper: - Microfibre techpro Sole: - Twelve carbon composite sole Tecnology: - Soft instep closure system 4 - Tecno-3 push system - High security velcro - Sidi heel cup - Replaceable heel pad
$399.99
Dedicated to the difficult to fit, the Sidi Ergo 5 guarantees a perfect fit even for wider soles or high insteps, ensuring rigidity and performance with unparalleled fit and comfort. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -The Tecno-3 Push Flex dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -The High Security Velcro closure is safe, simple, reliable, and easy to fine tune -The heel cup is integrated, with a new lightweight design, and is reinforced to avoid deformation after prolonged rides -The Sidi Carbon Composite 20 Sole is constructed of Carbon Fiber injected into a nylon matrix. The nylon is impervious to water damage and doesn't lose rigidity in hot or humid weather or as it ages. The result is a significantly lighter and stiffer sole
$399.00
KEY PERFORMANCE FACTORS SUPERIOR POWER TRANSFER An all-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber for superior toe-heel stiffness. The unique design significantly boosts power transfer while allowing enough torsional flex for natural foot movement. This helps minimize lower leg strain during the pedal stroke with zero watts wasted. PERSONALIZED FIT Most cycling shoe enclosures press the foot down toward the sole. The Surge Pro’s redesigned ExoWrap system draws the foot up into the shoe, using its unique wrap-around design and new micro-adjust Li2 Boa® reels. The result is a 360-degree foot closure that gives you an ultra-comfortable and personalized fit. COOL COMFORT A new polyurethane coated mesh upper with laser cut micro-perforations delivers maximum ventilation combined with long-lasting durability. The seams are welded rather than sewn, which helps minimize weight and gives these road shoes a sleek profile with a supple feel. - All-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber lay-up construction for superior toe-heel stiffness - An all-new 360º wrap-around upper with high frequency welded seams and laser cut micro-perforations for optimal ventilation and a balanced foot climate - All-new internal ExoWrap structure for an ultra-comfortable, 360-degree foot enclosure and a customizable fit - All-new exclusive performance last offers all-day comfort and increased fit options - All new micro-adjust Li2 Boa reels give a super secure and comfortable fit, Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate
$399.00
The new Macha Pro helps you get the most out of every pedal stroke whether you’re out on a training ride or in a mid-race sprint. Anchored by the power of technology, the Macha Pro puts the Motion Efficiency System to work for you. These performance-level racing shoes are lightweight and efficient, and the stylish design comes in two colorways. FEATURES - 100% long-fiber carbon ExoBeam plate with all-new dual beam design, offers secure mid-foot contact for better power transmission - ExoBeam technology reduces strain on the knee and ankle joints - All-new 360º ultra-lightweight, wrap-around upper with high frequency welded seams offers optimal support - All-new internal, direct pull ExoWrap structure design with all-new dedicated Boa Li2 dial produces a 360° foot enclosure for customizable arch fit and support - Laser cut micro-perforations in the upper for improved ventilation, cycling-specific performance last enhances overall performance - SharkSkin heel lining, removable sockliner with tunable arch support and TransTextura Plus layer
$395.00
Always Evolving It wasn't easy to improve upon the class-leading design and function of our D3 helmet, but we made it happen. Built with an aerospace shell design and materials, we were able to get the D4 Composite helmet to 1050 grams without sacrificing any strength. MIPS C2 protection system is used to add an additional layer of safety in the event of a fall. For comfort, the D4 Comp routes cooling air through a front air intake system that flows through the polymer center and power grid side mesh keeping your head cooler during the ride. X-static and XT2 anti-microbial/anti-odor padding keep the inside of the helmet a much nicer place to be. - Aerospace composite shell - Lightest Composite DH/BMX Race helmet we have ever built 1050g (Size M +/- 50g) - MIPS C2 brain protection system-protects against rotational impacts - 24 total vents: 10 front intake ports, 5 overhead intake vents that channel air on top of your head and an industry leading 7 rear exhaust ports - Anti-Microbial/Quick Dry XT2 Quick release contoured 3D cheek pads create an anatomically optimized fit - Separately placed X-Static & XT2 precision fit headliner with 7 anchor points gives you optimal fit - EPP Collarbone impact system; a relief area reduces the forces in the center lower section of the helmet where shoulder/collarbone impacts have been known to occur - Drawstring helmet bag included - 3-year warranty - CERTIFIED FOR: ASTM F1952 DH MTB, ASTM F2032 BMX, CPSC 1203, CE N1078, AS/NZS 2063
$375.00 - $380.00
Sustain your speed when every second counts. Our top-performing time-trial helmet, the Smith Jetstream TT has a lightweight aerodynamic design ideal for race day. Zonal Koroyd and MIPS come together to provide energy-absorbing impact protection so you have full confidence as you maintain your momentum through the toughest sections of the course. A magnetic visor makes it easy to switch between a color-enhancing ChromaPop lens or a clear option. Five strategically placed vents help keep you cool without adding drag so you can put all your focus into securing your place on the podium. PROTECTION: - Zonal Koroyd coverage for lightweight, energy-absorbing and ventilated impact protection - MIPS Brain Protection System reduces rotational forces caused by angled impacts to the head. - CPSC and CE EN 1078 certified FIT / INTEGRATION: - VaporFit dial adjustment system offers 270-degree fit adjustment with the turn of a dial - Low-profile Y-strap divider provides a secure fit to reduce wind noise and aerodynamic drag - Magnetic visor with option of ChromaPop or clear lenses - ChromaPop lenses enhance contrast and natural color to make the details pop FEATURES: - Five strategically placed vents for optimal airflow - Ionic+ antimicrobial lining offers sweat-activated odor control - Lightweight, low-bulk single layer webbing. - Weight: (Size M, MIPS): 14 oz / 410 g CERTIFICATION: CPSC, CE EN 1078
$379.00
Lighter. Stronger. Faster. Designed for speed and comfort, the Vaypor S once again redefines the standards of pro level road cycling shoes. Bont's latest flagship shoe has been further refined to improve on their already industry leading standards. Whether you are a pro racer or simply a rider who demands the finest, the Vaypor S will provide the most anatomically and biomechanically correct platform with the most efficient power transfer platform currently available. - 100% carbon monocoque chassis utilizing hand-laid unidirectional carbon and Bont's proprietary heat molding technology - Duralite upper & suede leather liner - 3.6mm stack height - Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: replaceable heel guard - Padding: memory foam - Fully heat-moldable monocoque chassis - Cleat mounting: 3-hole Look configuration plus mm grid plus grip - Closure System: Dual Dial System with replaceable Kevlar Wiring - Weight: 230 grams (approximate weight based on size 42 shoe)
$379.00
The MET Parachute MCR is MET's convertible full-face helmet developed for enduro, all-mountain and e-MTB riding. Parachute MCR is designed to be truly two helmets in one. The full-face has a stylish and aggressive look providing all-round protection, while the open face reflects the style of MET's all-mountain helmets. MCR stands for Magnetic Chinbar Release and instantly converts from full to open face helmet and back. MCR is MET's revolutionary system created in partnership with Fidlock. Featuring the MIPS brain protection system and complying with ASTM 1952-15/2032-15 (shell and chinbar), riders have the highest level of protection from linear and rotational impacts. In addition, MET's unique flexible injected visor to avoid extra rotation of the neck in case of a crash. The BOA FS1 offers incremental adjustment forward and backward to deliver a precise and adaptable fit, while the belt runs 360° around the head to avoid any pressure points, optimizing comfort. It also offers 3 positions for vertical adjustment. 21 vents and the MET engineered internal air channeling work in synergy with the breathable chinbar to maximize the airflow at low and high speed. The chinbar is engineered to reach the optimal balance of stiffness and energy dissipation to give riders confidence when wearing the Parachute MCR. - In-mold polycarbonate shell with EPS liner - MCR Magnetic Chinbar Release System allows the helmet to easily convert from a full face to open face design - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - ASTM 1952-15/2032-15 certified shell and chinbar provides additional safety - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Breathable chinbar is covered with a durable injected PU foam - Removable cheek-pads (2 sizes included) allow you to achieve the perfect fit - BOA-FS1 Fit System with 360° head belt and vertical adjustments offer a customized fit - Fidlock Magnetic Buckle makes it easier to secure the helmet - 21 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications: CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm
$379.00
The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.
$350.00
Maximize your speed, vision, and protection with the Podium TT. Using Smith’s proven Aerocore construction featuring Koroyd, we combine best in class protection with a streamlined aerodynamic efficient design to cut out the weight, and improve overall ventilation with this time trial helmet. With special attention to a riders overall performance, the VaporFit adjustable system gives you the precise fit you need, while the oversized exhaust vents provide maximum ventilation without the added drag. While out on course, see more detail with the integrated Podium TT Optical Shield featuring our award-winning ChromaPop lens technology. Have the confidence to go harder and faster than ever before when every second counts. - Lightweight Aerocore in-mold construction - Zonal ventilated protection featuring patented Koroyd material - MIPS system available in all colors - VaporFit adjustable fit system - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Two exhaust vents provide laminar airflow for maximum aerodynamic performance - Magnetic visor with ChromaPop lens and clear lens included - Weight (Size M, MIPS) 12.69oz / 360 grams - Certification: CPSC, CE EN 1078, AS/NZS2063 Sizing - Medium: 55 – 59cm – Large: 59 – 62cm
Page 1 of 62 Next page