Chainrings

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade. - Fully CNC AL rings - X-SYNC technology - Lighter weight than spider version (~25-50g depending on size) - Offset: 0mm (BB30), 6mm (GXP)

- 12 speed Record / Super Record chainring - Surface treatment improves durability - 145 BCD outer rings are specific to Record or Super Record, while 112 BCD inner rings are shared between the two groups

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

absoluteBLACK Premium Round 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features. They are designed for cranks like Shimano Dura-Ace FC7950, Ultegra FC6750, Shimano 105 5750, and others with a 5-bolt fitting. Optimized with smooth shifting in mind, premium chainrings have a unique shifting ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Rings provide exceptional stiffness due to thicker, 5mm construction - Provides excellent weight-to-strength ratio - If only switching the inner chainring, use all original crank bolts

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime. - The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain - X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise - Designed to be used with Eagle chain - 104mm BCD

This direct mount chainring coincides perfectly with the Afterburner Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Material: Steel - Precision CNC-machined AL7075/T6 - Long tooth profile enhances chain retention - Thick Thin tooth design for maximum chain engagement - SH12: Compatible with Shimano 12s chain

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy

Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability. - Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders - Light weight and incredibly durable aluminum chainring - Compatible with SRAM T-Type chains - SRAM Threaded chainring tool required for installation (Sold separately - TL0190)

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - Medium Overshift Pin - 104mm BCD - Use with 22T

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

absoluteBLACK Round 104/64 BCD Chainrings are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - The chainring's offset helps to create an ideal chainline - Provides exceptional reliability, weight savings, and stiffness - 9, 10, 11, and 12-speed Eagle compatible - Use with absoluteBLACK short chainring bolts

absoluteBLACK SpideRing Oval 2x Direct Mount Chainring Sets for Cannondale are incredibly stiff and lightweight. Sold as a set, they are designed for Cannondale Hollowgram cranks, such as SI, SISL, and SISL2. Chainrings have a ramp and recess design to improve shifting performance. Ovality has been optimized for road climbing with timing of 108 -110.5° after TDC (top dead center). - Sold as a 2x chainring set - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Ramp and recess shifting design makes shifting smooth and fast - Small chainring is replaceable - Provides excellent weight-to-strength ratio

"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."

Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.

Note: This is a CAMO chainring ONLY. A CAMO spider is required to complete this system. More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Drop-Stop®technology On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Now available in ultra-durable stainless steel. The CAMO chainring system was created by the Wolf Tooth engineers for Chainline And Material Optimization on direct-mount style chainrings. The key advantages include: - Perfect Chainline - for wear and shifting precision - Optimal material usage - for weight, stiffness, and wear - Price - for less expensive replacement chainrings - Swapping - very fast chainring change out with 5 small bolts and no nuts. - Availability - Wolf Tooth is the one-stop-shop for your direct mount needs...round or oval, stainless or aluminum, and no matter the crankset. - Bling! - spider colors and bolt colors add a little flash to your sweet ride. Compatibility: - This chainring is for Wolf Tooth CAMO spiders only. It is NOT compatible with any other chainring mountings. - The CAMO spiders come with stainless steel bolts. - For 1x9, 1x10,1x11, and 1x12 drivetrains (including SRAM Eagle). If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - varies by which spider you choose - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains DROP-STOP ST Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - - Recommend the use of a clutch-style rear derailleur for the best chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30t/32g | 32t/38g | 34t/46g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - These rings are for use with Shimano 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703 or 4700, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - Sizes 40T and larger are compatible with Dura Ace 9100, Ultegra 8000, and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 38T chainring will not work for this modification. Click here to review the process for the modification, which takes about 5 minutes to perform. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Chainline - 47.5mm DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck. - Recommend the use of a clutch style rear derailleur for the best chain security. Tech Specs: - Weight: 38t/66g | 40t/74g | 42t/81g - Material: 7075-T6 aluminum - Made in the USA

Looking for a 1X chainring for your Shimano compact triple crankset - models M782, M672, M622, or M612 – with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in this beautifully machined chainring with threaded standoffs that proved and ideal chainline. - Fits any 96 BCDShimano Symmetric 4-bolt crankset - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any 96 BCD Shimano Symmetric bolt pattern crankset, and here are instructions on how to measure your BCD. - Compatible with the following Shimano crankset models: M782, M672, M622, M612 - Not compatible with XTR M9000 or XT M8000 - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49mm. Provides a great chainline on most boost bikes. Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g - Material: 7075-T6 aluminum - Made in the USA

Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

The 102BCD chainring was made specifically for the XTR M960 crankset - Only fits on the M960 crankset in the middle ring position - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings only fit on the M960 crankset in the middle ring position - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - 6mm chainring bolts needed - Chainline: 50mm - Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, try using a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 32t/47g - Material: 7075-T6 aluminum

These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility: - Shimano XTR M9100, XT M8100, SLX M7100, and Deore M6100 series 12 speed cranksets. - Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset. - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 32t/66g | 34t/72g | 38t/81g - Material: 7075-T6 aluminum - Made in the USA

More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility - Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets. - Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset. - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains DROP-STOP ST - Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 32/65g - Material: 7075-T6 aluminum - Made in the USA

These nickel-plated chainrings were designed to look great on the Cane Creek eeWing titanium cranksets. They also work great on SRAM direct-mount cranksets. The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology. - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system. - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention. - Prevents premature ring and chain wear that can come from non-optimized profiles. More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - Cane Creek eeWing cranksets - SRAM direct mount cranksets with 3-bolt interface - Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12s SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12s SRAM Transmission (T-Type) Flattop, 12s Shimano HG+, or 12s Campy Tech Specs: - Weight: 32t/74g - Material: Nickel-plated 7075-T6 aluminum - Made in the USA

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Replacement chainrings in 110mm and 130mm BCD for SRAM 11-speed Yaw speed road cranks. Replace worn out rings or swap to change gearing for specific uses.

Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.

These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

- Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 64 Shimano Asymmetric - Material: Aluminum

FSA ATB chainrings deliver flawless shifting for any mountain drivetrain. Available in alloy and steel options.

Engingeered to interface with Bosch motor systems, SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive T-Type tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - Steel (36T,38T). - AeroGuard Compatible that fufills EN 15194:2017 standard - Backwards compatible with other Eagle Technology.

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

These 102 BCD rings fit Shimano XTR M960 -- they cannot be used on any other crankset! Only purchase this chainring if your crankset looks like the one in the photo on this page. Color: Black Rings have 50mm chainline. All chainrings feature our Drop-Stop tooth design and are made from 7075 Aluminum. Use a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring. *** Be sure to order a colorful set of Wolf Tooth chainring bolts to go with you new ring! Order the 6mm (short) bolt+nut combo. ***

These fit all common cranksets using 104 BCD mounting. See this WTC Tech Document if you have a Shimano Double M785 XT or M665 SLX double crankset Note that the 30T chainring is threaded and has a 48 mm chainline. All other rings have 50mm chainline. All chainrings feature our Drop-Stop tooth design and are made from 7075 Aluminum. Use a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring. Be sure to order a colorful set of Wolf Tooth chainring bolts to go with your new ring! For the 30T order our 10mm (long) bolts and all other sizes order the 6mm (short) bolt+nut combo. Color: Black Product Weights: 30t - 36g, 32t - 47g, 34t - 56g, 36t - 60g, 38t - 66g

Color: Black 110 mm BCD chainrings to fit standard cranks with 5 bolt, 110 mm spiders. Does NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. They WILL work with 11 speed chains. Strongly recommend a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring. *** Be sure to order a colorful set of Wolf Tooth chainring bolts to go with you new ring! Order 6mm (short) bolt+nut combo. *** Note on mud: wide/narrow chainrings do no work well in heavy mud (Wolf Tooth or any other brand) if you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper and clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck. All chainrings feature our Drop-Stop tooth design and are made from 7075 Aluminum. Use a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring. Product weights: 36t - 58g, 38t - 66g, 40t - 74g, 42t - 81g, 44t - 90g

Color: Black 130 mm BCD chainrings to fit standard cranks with 5 bolt, 130 mm spiders. Does NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. They WILL work with 11 speed chains. Strongly recommend a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring. *** Be sure to order a colorful set of Wolf Tooth chainring bolts to go with you new ring! Order the 6mm (short) bolt+nut combo. *** Note on mud: wide/narrow chainrings do no work well in heavy mud (Wolf Tooth or any other brand) if you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper and clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck. 38T important note: The chain will contact the spider arm slightly when using the 38T chainring (see photo below). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. All chainrings feature our Drop-Stop tooth design and are made from 7075 Aluminum. Use a 10 or 11 speed chain. The only brand of chain we don't recommend is Wippermann. Product weights: 38t - 52g, 40t - 60g, 42t - 62g, 44t - 79g

You asked for it, we made it -- the Wolf Tooth GC is now available in a slightly smaller size! Most of the low gearing from its big brother with improved shifting in the smaller cassette cogs. Be sure to check out the GC tech page for more details This cassette sprocket is only for use with Shimano brand 10spd XT & XTR cassettes. It is NOT compatible with any other brand or model of cassette. The shift points are properly timed to the tooth locations on the 36T Shimano cogs for optimal shifting performance. Use of this cassette sprocket requires removal of the 17T or 15T cog & spacer from your cassette. Note on “B-screw”: We have found a longer screw is almost never needed with SRAM derailleurs and only needed for about 50% of Shimano derailleurs. We have added it as a separate item in our accessories category. If you think you might need the longer screw, order one separately or just go to your local hardware store and pick up an M4 x 25 socket head cap screw. You may need a longer chain than what is presently on your bike. Make sure that when shifted to the 40T cog, there is still some amount of forward travel possible with the rear derailleur cage. This is especially important on bikes with rear suspension. We have tested with Shimano, KMC & SRAM chains – all function well. Compatible only with the following Shimano 10spd cassettes XT 11-36t (CS-M771) XTR 11-36t (M980) Not compatible with SLX 11-36 cassettes because the 17t cog cannot be removed. Note: unlike the 42T, the GC 40T will usually work with 2011 or older SRAM rear derailleurs. We cannot guarantee it on all bikes however. Weight 79g

The GC42 cassette cog is so big that when machining the first batch, the machinist thought he made a mistake! If being big is cool then the GC42 cassette cog is the coolest cog around. This cog is made with the precision and finish our customers have come to expect from WTC, and this enables quite possibly the best feeling shift in the cassette. Be sure to check out the GC tech page for more details This cassette sprocket is only for use with Shimano brand 10spd XT & XTR cassettes. It is NOT compatible with any other brand or model of cassette. The shift points are properly timed to the tooth locations on the 36t Shimano cogs for optimal shifting performance. Use of this cassette sprocket requires removal of the 17T or 15T cog & spacer from your cassette. Note on “B-screw”: We have found a longer screw is almost never needed with SRAM derailleurs and only needed for about 50% of Shimano derailleurs. We have added it as a separate item in our accessories category. If you think you might need the longer B-screw, order one separately or just go to your local hardware store and pick up an M4 x 25 socket head cap screw. You may need a longer chain than what is presently on your bike. Make sure that when shifted to the 42T cog, there is still some amount of forward travel possible with the rear derailleur cage. This is especially important on bikes with rear suspension. We have tested with Shimano, KMC & SRAM chains – all function well. Compatible only with the following Shimano 10spd cassettes XT 11-36t (CS-M771) XTR 11-36t (M980) Not compatible with SLX 11-36 cassettes because the 17t cog cannot be removed. Weight 86g Note: the GC 42 is not compatible with 2011 or older SRAM rear derailleurs due to the location of the upper jockey wheel. It is difficult or impossible to get satisfactory shifting with the 2011 or older SRAM rear derailleurs so we do not recommend using the GC 42 if you have one of these. The GC 42 works great with the newer SRAM rear derailleurs however.

The GC42 cassette cog is so big that when machining the first batch, the machinist thought he made a mistake! If being big is cool then the GC42 is the coolest cog around. This cog is made with the precision and finish our customers have come to expect from WTC, and this enables quite possibly the best feeling shift in the cassette. Be sure to check out the GC tech page for more details. This cassette sprocket is for use only with SRAM brand 10spd X5, X7, and X9 cassettes. It is NOT compatible with any other brand or model of cassette. The shift points are properly timed to the tooth locations on the 36T SRAM cog for optimal shifting performance. Use of this cassette sprocket requires removal of the 17T or 15T cog & spacer from your cassette. Note on “B-screw”: We have found a longer screw is almost never needed with SRAM derailleurs and only needed for about 50% of Shimano derailleurs. We have added it as a separate item in our accessories category. If you think you might need the longer B-screw, order one separately or just go to your local hardware store and pick up an M4 x 25 socket head cap screw. You may need a longer chain than what is presently on your bike. Make sure that when shifted to the 42T cog, there is still some amount of forward travel possible with the rear derailleur cage. This is especially important on bikes with rear suspension. We have tested with Shimano, KMC & SRAM chains – all function well. Compatible only with the following SRAM 10spd cassettes X5 11-36T (PG-1030) X7 11-36T (PG-1050) X9 11-36T (PG-1070) Weight 86g Note: the GC 42 is not compatible with 2011 or older SRAM rear derailleurs due to the location of the upper jockey wheel. The best ways to tell the vintages of your rear derailleur is 1) If you have a type 2 (clutch type) rear derailleur it is 2012 or newer and 2) the upper jockey wheel on 2012 and newer rear derailleurs are offset from the derailleur cage's axis of rotation. It is difficult and sometimes impossible to get satisfactory shifting with the 2011 or older SRAM rear derailleurs so we do not recommend using the GC 42 if you have one of these. The GC 42 works great with the newer SRAM rear derailleurs however.

Color: Black These bash rings attach directly to our direct mount Drop Stop chain rings. These are designed for XC, trail and enduro riding. They are not meant for downhill use where heavy impacts are expected. You will need short (6mm long) chainring bolts/nuts to mount the 28T-36T bash rings (we recommend the Wolf Tooth ones sold here on our store). The 24/26T bash ring includes M5 mounting bolts. *** Note: These will not fit any other chainring or spider -- only Wolf Tooth SRAM direct mount! *** Made from 7075-T651 aluminum. Product weights: 24/26 - 44g, 28/30 - 47g, 32/34 - 50g

Color: Black These can also be used on a BB30 / PF30 long spindle crankset -- the 3rd product picture shows you how to determine if you need this ring or the Short Spindle BB30. This SDM ring is dished in ~6mm, whereas the BB30 short spindle ring is flat. These are Direct Mount chainrings for SRAM GXP crank. This will replace you existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the SDM ring. SDM chainrings fit on SRAM S2200, S2210, X9, X0, X01, XX1, Truvativ AKA Cranksets (GXP version) only. Newer S1400 (or X7) cranksets with removable spiders will work with SDM rings. Older versions of these cranksets may not have removable spiders. If the crankarm and the spider are all made from the same piece of aluminum it is not removable. Chainline is 50mm on all rings (on a GXP or BB30 long spindle crankset). All chainrings feature our Drop-Stop tooth design and are made from 7075 Aluminum. Use a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring. Product weights: 26t - 53g, 28t - 60g, 30t - 68g, 32t - 74g, 34t - 83g, 36t - 90g

We think these bolts the best on the market. They have a 5 mm hex socket and are 10 mm long so you can use a bash ring with your 30T x 104 chainring. The bolt length is laser engraved on the head to avoid confusion with shorter bolts. Simply better. No nuts are included with these bolts because the 30t x 104 chainring has threaded standoffs. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m MAX with light grease on the threads only. Product weight - 4 bolts = 4g

We think these bolts and nuts are the best on the market. Other short bolts/nuts designed for single rings use a slotted nut that is likely to strip-out the first time you use it. Ours use a large hex socket on both the bolt (5 mm) and the nut (6 mm). Bolts are 6 mm long and have the length laser engraved on the head. Simply better. These work great with Wolf Tooth 5 bolt rings or any other brand 5 bolt single chainrings. Designed and manufactured in the USA from 7075-T6 aluminum alloy. Torque: 6-7 N-m with light grease on the threads only. Product weight: 5 bolts = 9g

Take your chain retention to the quiet, simple, light level with SRAM's X01 X-Sync Chain Ring. It features SRAM's X-Sync narrow/wide tooth profiles to securely hold a chain through the roughest terrain, no chainguide required! A variety of sizes ranging from 30T to 38T let you dial in your rig for your ride. The unique chainring design allows you to slide the ring over the crank arm, so crank removal is not required. Available in 94mm BCD for SRAM's X1 cranks, or 104mm BCD to convert your standard crank to a single-ring system.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

The SUMO III is CNC machined from thick 6061 Aluminum with a simple and super-strong design. - Includes sprocket guard - Material: Aluminum - Chain Width: 1/8" - Bore: 24mm - Weight (oz): 2.3 - Thickness: 6 mm - Tooth Count: 25 teeth - Interface: Bolt Drive

absoluteBLACK Round Direct Mount 1x Chainrings for SRAM offer flawless drivetrain setup for SRAM 1x9, 1x10, 1x11, and 1x12-speed or single speed. They are designed for SRAM DUB, GXP, and BB30 cranks that have a removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long-Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks

SRAM's X-Sync Boost Direct Mount Chainring features tall teeth with alternating tooth profiles that hold the chain amazingly well and still provide space for mud to clear. - Chainring BCD: SRAM BB30 Direct Mount, SRAM GXP Direct Mount - Color: Black - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Offset: 3mm

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

Origin8's Thruster 110mm BCD 5-bolt chainring sets are great for road, 'cross, and gravel applications. Shifting ramps and stainless steel pins deliver smooth shifting, and these rings are 10 or 11 speed compatible. - Stamped AL2014-T6 alloy construction - BCD: 110mm 5-Bolt - Type: 2x - Chain Compatibility: 10/11s - Tooth Type: Standard

- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool

- Boost/Fat direct mount chainrings - Narrow/Wide tooth design for chain retention on 1x systems - 10, 11, or 12 speed compatible - Forged and hard anodized AL6061-T6 alloy construction - SRAM 3-bolt interface for crank arm mounting - BCD: Direct Mount - Type: 1x - Material: AL6061 - Chain Compatibility: 10/11/12s - Offset: 3mm