Parts & Accessories
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
All the parts needed to mount a Flux Expert headlight to a second bike - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
$10.00 - $32.00
Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt
A universal quick release mount that attaches to round-shaped drop and flat handlebars.
Perfect for E-city and E-trekking bikes, the fork mount puts the light directly on the fork crown above the mudguard, allowing space for a bag or shopping basket on the front of the handlebar.
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.
Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware
$2.99 $5.00 40% Off
Designed to accommodate the more aerodynamic profile of aero bars and seatposts, the Stix Aero Strap mount gives you the ability to attach a Specialized Stix for day or night riding. - Stix light mount with longer, flexible silicone strap to fit Shiv and Venge seatposts, plus Aerofly handlebars.
The Garmin XL Combo mount by K-Edge is the next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1030, 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. The K-Edge advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. Compatibility - All Lumina Series lights equipped with K-Edge GoPro Adapter (sold separately). - Supported Computers: Garmin Edge 1030, 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights - Includes Garmin Pro XL Combo Mount and mounting hardware - CNC Machined 6061 T6 Aluminum - Fits 31.8mm handlebars - New clamp design is hinged for ease of installation - Weight: 64g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects (damages due to abuse or crashing excluded) - Note: Assembly bolts not meant to be removed or tampered with at any time.
AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems. Please note: Style and color may vary SYSTEM COMPATIBILITY - Pro 2200 Race - Pro 1800 Race - Pro 1400 Race - Pro 1200 Race - MiNewt Pro 770 Enduro - MiNewt Pro 750 - TriNewt - TriNewt Wireless - MiNewt Series
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
Do you have more than one bike? Get the most out of your Specialized Flux Expert tail light (sold separately) by getting an additional seatpost mount for easy switching between your rides. - All the parts needed to mount a Flux Expert taillight to a second bike - Includes mounting bracket, three interchangeable rings to fit different seatpost sizes and a 2.5mm Allen key. - Interchangeable rings will fit 27.2mm, 30.9mm, and Venge Aero seatpost.
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
Replacement mounting strap for the Strip Drive LED lights.
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes. - Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle. - Includes stamped aluminum bracket that can be bent to adjust the light's angle. - This mount features a snap-in, breakaway mount to protect light if snagged. - Will only work with Specialized saddles with SWAT-compatible mount holes in the base. - Includes mounting hardware.
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.
Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only
Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.
Recon-E Light to Shimano motor unit connector cable.
- Replacement aero mount for Numen light
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Replacement lens for Flux Expert Headlight. - Includes clear lens and gasket.
Universal Handlebar Bracket Strap - Original rubber adjustment strap for use with UNI-BRKT handlebar mount - This DOES include the metal retainer loop (metal part that connects to adjustment lever)
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
There are those among us who like to keep the cockpits of our bikes neat and tidy, and we'll seek out any means necessary to do so. This mount gives you the option of position your Flux light beneath your computer head unit by using an action-camera type attachment. - Keep your Flux light out of the way by mounting it underneath your computer head unit. - Works with any computer mount that includes a bottom mount for action cameras. - Not for helmet use.
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
Page 1 of 2 Next page