Your Search: "specialized fatboy"

Specialized's Fatboy Expert Carbon is a bantamweight in the plus-sized world. By incorporating carbon, they've elevated the fat bike platform to a higher level of performance, strength, and efficiency. This trail-eating champ is built around a svelte FACT 10m Carbon frame and vibration-quieting carbon fork. Tubeless 4-inch wide Ground Control tires are wrapped around lightweight HED Big Deal carbon wheels that provide trail-shredding stability while flying up climbs. While you're eyeing new and offbeat places to roll your Fatboy, you can count on the efficient 11-speed one-by SRAM X01 drivetrain powered by carbon Race Face Next SL cranks to get you there quickly. When it's time to slow it all down and take in the scenery, SRAM Guide R brakes are on the case. Sand? Snow? Mud? The Fatboy is one light fatty that backs it up with ability.

If having fun for the sake of having fun sounds appealing to you, "going fat" will change the way you ride forever. The security and control that the wheel system, found here on our Fatboy SE, provides is unparalleled. You get dramatically more traction, grip, and floatation than with traditional mountain tires, all without sacrificing much to climbing efficiency. The end result is easy to explain—you have way more fun. And to make sure of it, we built the Fatboy with a durable, no-nonsense list of components that are low-maintenance and eager to perform season after season. - The frame features an M4 alloy construction that provides the ideal blend of efficiency and durability, while the geometry creates a roomy top tube and short chainstays for easy climbing and confident descending. - Our alloy fork with air-formed legs is lightweight and pairs up perfectly with the fat wheel system to soak up trail chatter and bumps. - The SRAM 11-speed groupset features a wide gear range that delivers climbing and descending efficiency in spades. On top of this, the one-by setup is notorious for being next to impossible to drop a chain with, plus it provides a significant weight savings in comparison to a standard two-by setup.

Every now and again, we're all faced with going on a diet, and the same is true for our Fatboy. With the new Fatboy Comp Carbon, we've elevated the fat bike platform to a higher level of performance, strength, and efficiency. It features a sophisticated 10m carbon construction that's lightweight, ultra-compliant, and stiff in all the right places for the climbs. The layup also allowed us to integrate internal cable routing to keep things clean and simple through nasty conditions. Sprinkle in a durable one-by drivetrain and some near bombproof alloy wheels, and you have a bike that will give new purpose to winter and more fun to springtime. - An immaculate FACT carbon fiber construction ensures that the frame is lightweight and plenty stiff in all the right places. Internal cable routing is also incorporated; ensuring that slush, sand, snow, or dirt will have no bearing on performance out on the trail. - A FACT carbon fiber fork provides tons of compliance and absorbs chatter, while simultaneously keeping the overall weight of the bike down. - SRAM's 12-speed GX Eagle drivetrain, with a Truvativ Descendent crank, features an ultra-wide gear range that delivers climbing and descending efficiency in spades. On top of this, the one-by setup is notorious for being next to impossible to drop a chain with, plus it provides a significant weight savings in comparison to a standard two-by setup.

PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g

- Replacement pads & holders w/ Velcro; for Specialized Carbon Aerobar or Specialized Hydroformed Alloy Aerobar

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

Quickly charges your Specialized SL battery. - Custom Li-Ion battery charger for Specialized SL batteries. - 48V system - Compact and lightweight design. - Equipped with a custom plug and light indication of the charging status.

- Provides 45mm of incremental height adjustment for the extension riser stack on the Specialized Carbon Aerobar or Specialized Hydroformed Alloy Aerobar. - Includes two 5mm spacers, two 10mm spacers, four 20mm spacers, and all necessary hardware.

Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status

Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life

These lightweight alloy bar end plugs provide a clean look and allow the use of bar ends on your Specialized carbon bar. - 100% CNC machined, 4-piece alloy design. - Dual side-loaded cylinder design ensures even pressure across full width of plug and bar end clamp. - Aluminum "lip" protects carbon bars from impacts. - Beautiful and clean machined design enhances handlebar looks. - Expansion range: 18.5mm to 20.0mm - Weight: 22g/pair - NOTE: Specialized bar end plugs are required for Specialized carbon bars.

Not all chainrings are created equal, and if you need proof of this, look no further than these chainrings that Praxis made exclusively for Specialized. - Custom design Praxis rings For Specialized only - Cold-forged, Heat-treated, and hard anodize 7075 T6 Aluminum - Compatible with Campagnolo, Shimano, and SRAM 10-/11-speed cranksets

Developed to work on either the Specialized Carbon or Hydroformed Alloy Aerobar, the Shiv Low-Stack Clamp reduces up to 19mm of stack height, in order to obtain a lower position while in the Aerobars. - Compatible w/ Specialized Carbon or Hydroformed Alloy Aerobar (2102-2010 / 2102-2005) - Reduces 19mm (1.9cm) of stack height

Tactic 4 Visor from Specialized.

25g CO2 Canister's from Specialized.

Ambush II Visor from Specialized.

16g CO2 Canister from Specialized.

Logo Arm Cover 2024 from Specialized.

Mindset Prevail 3/Evade 3/Tt5 from Specialized.

Neoshell Rain Shoe Cover from Specialized.

S-Works Evade 3 Padset from Specialized.

S-Works Prevail 3 Padset from Specialized.

- Off-setting shims to use with Specialized Multi-position Stems

Replacement pads for all Specialized Mio helmets.

Turbo S Diagnosis Tool from Specialized.

Replacement pads for all Specialized Centro helmets.

3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.

Replacement pads for all Specialized Align/Sierra/Flash helmets.

Replacement visor for all Specialized Centro helmets.

Replacement visor bolts for Specialized Dissident helmets.